Email Sales: [email protected]
Email Technical Support: [email protected]

Order Line:  714-832-8874
Fax: 714-832-8082

Mailing Address:
Geckodrive, Inc.
1540 South Grand Ave
Santa Ana, CA 92705

9 thoughts on “Contact”

  1. I see that the GN215 controller can run 4 axis’ from the controller. I’m thinking that I would need 3 additional Digital Step Drives to accomplish this. Is that correct?

  2. Hi

    i am looking at a project where i need a torque controlled drive.

    At this stage i have a direction signal and a pwm torque signal. I need a max of 10 amps and about 100 volts but would like the ability to go to 150 volts if needed. It will be driving a stepper motor with an encoder. it will be low speed most of the time running stalled with a max of 100rpm but only for less than a 200 deg

    are you able to help with this



  3. Hi
    I recently purchased a g540 from an Australian company, who supplied me with a 12 volt power supply. no matter what I have tried I can’t get any movement from the steppers using mach 3.
    Will it run on 12 volts and also do I still need resistors if I’m using these? GC-02 DB-9 Stepper Breakout Board

  4. re-Representation in UK – local technical/product/application support

    Are you represented in the UK

    STEP DESIGN Ltd. Are looking to represent a Stepper-Servo product manufacturer as GEKODrive with a view to providing local technical/product/application support, providing added value to our existing business

    I this is of interest I should be happy to hear from you.

    Please find as below my contact details:


    R.W. (Bill) Hodgson
    Tel. No. 01670 857906
    Mobile: 07900 893293
    Alt email: [email protected]
    Twitter: @STEPDESIGNLtd

Leave a Reply

Your email address will not be published. Required fields are marked *